Assembly Instruction

ASSEMBLY INSTRUCTION

MIRROR DESK WITH DRAWER

Mirrored Top

Metal Frame

Front Right Leg

Front Left Leg

1pc

Back Leg

Short Stretcher

Long Stretcher

Knob

2pcs

1pc

Bolt

End Cap

Allen Wrench

1/4”x5/8”

22pcs

4pcs

1pc

This page lists all the contents included in the box.

Please take the time to identify the hardware as

well as the individual components to this product.

As you unpack and prepare for assembly, place

the contents on a carpeted or padded area to

protect them from damage.

** Pre-attached to the

inside of drawer **

PAGE 1
ASSEMBLY INSTRUCTION MIRROR DESK WITH DRAWER A B Mirrored Top C Metal Frame 1pc 1pc E F Back Leg D Front Right Leg Front Left Leg 1pc G Short Stretcher 1pc H Long Stretcher Knob ** Pre-attached to the inside of drawer ** 2pcs 2pcs I J Bolt 1pc K End Cap 1pc Allen Wrench 1/4”x5/8” 22pcs 4pcs 1pc This page lists all the contents included in the box. Please take the time to identify the hardware as I well as the individual components to this product.
PAGE 2
*** Do not tighten screws & bolts until the entire unit is completely assembled. 1 2 Attach metal frame (B) to mirrored top (A) using bolt (I) and allen wrench (K) as shown. Attach front right leg (C), front left leg (D) and back leg (E) to mirrored top (A) using bolt (I) and allen wrench (K) as shown.
PAGE 3
4 Using bolt (I) and allen wrench (K) again, attach short stretcher (F) between front right leg (C)/back leg (E), and front left leg (D)/back leg (E) Then, attach long stretcher (G) to back leg (E) as shown. Attach end cap (J) to leg (C) (D) (E). Please tighten all bolts at this step. Carefully turn the assembled unit upright. Remove drawer knob w/ plastic washers (H) from inside of the drawer and reattach on drawer front as shown. The mirrored desk assembly is now complete.