Assembly

Connect assembled bed frame
and rails to your headboard.
Attach pieces using (4) 1” x ¼”
bolts, (8) 1¼” washers*, and
(4) ¼” nuts. Proceed to Step 5
for Wingback beds, otherwise
continue onto Step 6.
* Use a washer on each side of the metal
legs when attaching headboard to the
bed frame.
Step 4
(Queen bed frame image displayed)
Step 5
Wingback Side Rail Bolt Chart
Bolt Size
2” x 5/16”
2½” x 5/16”
(Queen bed frame image displayed)
Only for Wingback beds:
Refer to chart to use assigned
bolts and (2) 1 ¼” washers for
the top hole (see image). Bolts
are enclosed with headboard
hardware. You might have to
loosen the bolt/washer below it to
align both holes properly.
3” x 5/16”
No bolt needed