CURIO CABINET BLACK ASSEMBLY INSTRUCTION Page 1 of 6
ASSEMBLY INSTRUCTION DOOR GLASS 1PC PLASTIC BAR SHELF SUPPORT SIDE GLASS 4PCS 2PCS TOP WOOD PANEL BOTTOM WOOD PANEL BACK GLASS 2PCS 1PC 1PC 1PC SHELF GLASS Page 2 of 6 4PCS
ASSEMBLY INSTRUCTION LEG 4PCS ALLEN BOLT-LARGE 8PCS WASHER 8PCS HINGE 4PCS HINGE INSERT 4PCS METAL WITH ADHESIVE 4PCS SMALL BOLT 8PCS PLASTIC MAGNET 4PCS HANDLE 2PCS METAL CONTACT 2PCS ADHESIVE 4PCS SCREW 4PCS ALLEN KEY 1PC STEP 1 SUCTION CUP 16PCS BOLT 16PCS SETP 1 : Assemble the Bottom Wood Panel (G) and Inner Shelf Support (E) with Washer (3) and Allen Bolt-Large (2) as illustrated. Tighten bolt with Allen Key (13).
ASSEMBLY INSTRUCTION STEP 2 Step 2 : Insert Back Glass (C) into the Plastic Bars (D) into the side that is less deep.Reference the image closely for this step. STEP 3 Step 3 : Insert each Side Glass (B) downard and into the Plastic Bar (D). Screw the Top Wood Panel (F) onto the Frame by inserting Allen Bolts-Large (2) through Washers (3) and onto the Panel. Tighten with Allen Key (13).
ASSEMBLY INSTRUCTION STEP 4 Step 4 : Assemble the suction cups (14) on shelf support (E) using middle sized bolt (15) and turn enough to secure in place, but not all the way. We will come back to this step to tighten the bolts when the curio assembly is almost completed. STEP 5 Step 5 : Place shelf glass (H) on the shelf support (E) .
ASSEMBLY INSTRUCTION STEP 6 STEP 7 Step 6 : Insert Hinge Inserts (5) and Hingers (4) into the top and bottom Panels (F&G) of the frame as illustrated. Insert Plastic Magnets (8) into the top and bottom Panels (F&G) of the frame as illustrated. Step 7 : Place Adhesives (11) on top and bottom corners of the Door Glass (A) as illustrated in diagram. Place Handle (9) and Metal Contact (10) on Door Glass (A) over the adhesives.
