Assembly Instructions

ManualsBrandsMercury Row ManualsChristmas78' H Slender Green Artifcial Fir Christmas Tree with 300 Lights

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

• Do not use seasonal products outdoors unless

marked suitable for indoor and outdoor use. When

products are used in outdoor applications, connect

the product to a Ground Fault Circuit Interrupter

(GFCI) outlet. If one is not provided, contact a

qualified electrician for proper installation.

• This seasonal use product is not intended for

permanent installation or use.

• When decorating trees, use miniature light bulb

strings or LED light strings only. “C” size bulbs

are not recommended.

• Do not mount or place near gas or electric heaters,

fireplaces, candles or other similar sources of heat.

• Do not secure the wiring of the product with

staples or nails, or place on sharp hooks or nails.

• Unplug the product when leaving the house, when

retiring for the night, or if left unattended.

• CAUTION: This is an electrical product – not a toy!

To avoid risk of fire, burns, personal injury and

electric shock, it should not be played with or

placed where small children can reach it.

• Do not let lamps rest on the supply cord or any wire.

• Do not use this product for other than its intended

use.

• Do not hang ornaments or other objects from cord,

wire or light string.

• Do not close doors or windows on the product or

extension cords as this may damage the wire

insulation.

• Never operate this product if the power cord or

plug is damaged.

• Use only manufacturer specified replacement bulbs.

• Read and follow all instructions that are on the

product or provided with the product.

USE AND CARE INSTRUCTIONS

• When storing the product, carefully remove the

product from wherever it is placed, including trees,

branches, or bushes, to avoid any undue strain or

stress on the product conductors, connections,

and wires.

• When not in use, store neatly in a cool, dry location

protected from sunlight.

FOR INDOOR USE ONLY. Retain carton for storage purposes.

CONTENTS

Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

re-Lit Hinged and Wrapped Trees . . . . . . . . . . . . . . . 2

Low-Voltage LED Lit Trees . . . . . . . . . . . . . . . . . . . . . 3

Shaping Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Bulb Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Fuse Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Music Match

Bluetooth

Lights System . . . . . . . . . . 4

Light Parade™ Multi-Function Light Sets . . . . . . . . . 4

SAVE THESE INSTRUCTIONS

RETAIN FOR YOUR RECORDS:

Tree Style No. UPC Code

Store Where Purchased

Date Purchased Price

LIMITED WARRANTY FOR ARTIFICIAL CHRISTMAS TREES

Please read this warranty thoroughly and familiarize yourself with

its restrictions and requirements.

Manufactured defective parts will be repaired or replaced.

PRE-LIT TREES LIMITED WARRANTY

3) All shipping costs to and from our facility for warranty service after

the third season of use will be the responsibility of the customer.

REQUIREMENTS FOR WARRANTY SERVICE:

AUTHORIZATION OF RETURN prior to shipping product for

warranty service.

IMPORTANT NOTES:

Removing factory attached functioning or non-functioning light

strings from any section of your pre-lit tree will void the warranty.

Please retain the product carton for storage purposes and/or for use

in the event of warranty service for product shipment.

Keep product away from heat and moisture. This limited warranty

does not cover damage resulting from accident, misuse, abuse,

negligence, or normal wear. In these instances, parts can be

purchased at a reasonable fee plus shipping charges.

CAUTION: IMPORTANT SAFETY INSTRUCTIONS

SAVE YOUR SALES RECEIPT. It will be

needed when requesting warranty service.

We warrant the light sets on its Pre-Lit trees against

manufacturer-only defects in material or workmanship for a

period of two (2) years from date of purchase; three (3)

years for low voltage LED trees. Culpability of Company is limited

to replacement of defective light set only.

Customers are required to contact us for

Shipping Costs under PRE-LIT WARRANTY TERMS: Please note

the following terms regarding shipping of product for warranty

service:

To have the Warranty placed into effect, completed online

registration of product is required with inclusion of sales receipt

noting purchase date and place. New product registration can only

be completed online at our website.

2) After the second season of use, the customer will be responsible

for cost of delivery to our facility. We will pay the return cost

delivery of parts repaired due to manufacturing defect. Customer

will be responsible for return shipping cost of any parts repaired

due to misuse or neglect.

To receive authorization of return, email or call us.

Information required will include: product item number, UPC bar

code number, name of store where purchased, a detailed

descriptionmail of the problem, and your address and phone

number.

New product registration can

only be completed online.

Assembly Instructions

A Tree Assembly and Shaping Video is available online. Please visit

the Customer Service tab to view.

1) We will pay the cost of shipping (to our facility and back to

customer), under warranty terms, during the first season of

use. Receipt dated prior to December 25 of purchase year

constitutes first season of use. Please note that it is the responsibility

of the customer to obtain a box of the smallest possible size and

shape to securely contain the part being shipped.

We warrant our 6.5 ft. and taller trees against

manufacturer-only defects for a period of five (5) years

from the date of purchase indicated on your sales receipt.

(White Trees, one year).

The lights on Pre-Lit Trees are warranted for a period of two (2)

years from date of purchase; three (3) years for low voltage LED

trees (see below).

At the discretion of us, you may either receive a replacement part or

be instructed as to which part(s) to ship prepaidto us for our

inspection and determination and/or possiblerepair. Replacement

or repair as provided by this limited warranty is our exclusive

remedy to the consumer and does not place our liable for any

incidental or consequential damages.

This Warranty does not apply to trees that are used as display trees

in the store. This warranty is only valid on purchases made from

authorized our retailers. We do not warranty tree stands that break

due to stress from tipping or moving of fully assembled/decorated

tree. This tree is for indoor use only. Outdooruse of this tree voids

the warranty.

Summary of content (8 pages)

PAGE 1
Assembly Instructions FOR INDOOR USE ONLY. Retain carton for storage purposes. A Tree Assembly and Shaping Video is available online. Please visit the Customer Service tab to view. SAVE THESE INSTRUCTIONS CONTENTS Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pre-Lit Hinged and Wrapped Trees . . . . . . . . . . . . . . . Low-Voltage LED Lit Trees . . . . . . . . . . . . . . . . . . . . . Shaping Instructions . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 2
Assembly Instructions Each carton contains one top section, one bottom section (larger trees include one or more middle sections) and a metal or plastic tree stand. 1. If your tree has a metal stand, unfold it and insert the eye bolt. Remove packing material from ends of poles. Put bottom section pole into tree stand making sure it is seated properly (Figure 1). Tighten eye bolt.
PAGE 3
Low Voltage LED Trees SPECIAL NOTE ABOUT GIANT TREES Fig. 1 Each carton contains one top section, one bottom section (larger trees include one or more middle sections) and a tree stand. 1. Unfold the tree stand and insert the eye bolt. Remove packing material from ends of poles. Put bottom section pole into tree stand making sure it is seated properly (Figure 1). Tighten eye bolt until bottom section is held securely. 2.
PAGE 4
Storage Memory Shape® Trees Remove all holiday decorations. Gently press tips back into center branch. Raise all branches to original upright position taking care not to place undue pressure on the attached ends of the branches. When disassembling tree, a twisting motion will help to separate the sections from each other. All tree parts can be replaced in carton and should be stored in a cool, dry place. Trees that feature Memory Shape tip technology do not require branch shaping.
PAGE 5
Instrucciones de Montaje PARA USO EN INTERIORES SOLAMENTE. Conserve la caja para guardar el árbol después de usarlo. El video de como ensamblar y dar forma al árbol esta disponible en internet. Visite nuestro servicio al cliente. CONSERVE ESTAS INSTRUCCIONES CONTENIDO Instrucciones de Montaje . . . . . . . . . . . . . . . . . . . . . . . . . . Árboles Abisagrados y Cableados Preiluminados . . . . . . Árboles con luces LED de bajo voltaje . . . . . . . . . . . . . . .
PAGE 6
Instrucciones de Montaje Cada caja contiene una sección superior, una sección inferior (los árboles más grandes incluyen una o más secciones intermedias) y una base de árbol de metal o de plástico. 1. Si su árbol tiene una base de metal, despliéguela e inserte la tornillo de ojo. Quite el material de embalaje de los extremos de los postes. Inserte el poste de la sección inferior en la base del árbol, y asegúrese de que esté bien asentada (Figura 1). Apriete la tornillo de pasador.
PAGE 7
Árboles con Luces LED de Bajo Voltaje NOTA ESPECIAL SOBRE ÁRBOLES GIGANTES Fig. 1 Algunos de los árboles más grandes de nuestra línea de productos incluirán más de una sección media. Si su árbol contiene más de una sección media, observe que cada sección estará numerada en orden ascendente. La sección inferior del árbol (que se inserta en la base) será la número 1. La sección siguiente, a medida que sigue armando el árbol, será el número 2.
PAGE 8
Almacenamiento Arboles Memory Shape® Quite todas las decoraciones navideñas. Con cuidado, vuelva a plegar delicadamente las puntas de las ramas hacia el centro de la rama. Levante todas las ramas a su posición vertical original, tenga cuidado de no hacer demasiada presión sobre los extremos de las ramas unidos al árbol. Al desarmar un árbol, un movimiento de torsión ayudará a separar las secciones entre sí.