(Black) (Ivory) (Light Gray) Upholstered Bed Full Weight Limit: 450 Lb / 204 Kg Thank you for purchasing our product! DO NOT RETURN TO THE STORE ! If parts are missing or damaged, contact us ! 1
Warranty Information Read Before Beginning Assembly Warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect. This warranty covers one year from the date of original purchase. This is solely limited to the repair or replacement of defective parts and assembly labor is not included. ● Call our toll free number if you need assistance.
Parts A P This item is packed in 2 boxes! All parts listed on this page are in Box A. If Box B is missing please contact your Retailer. Y X There are inner box(es) that include components required to complete this assembly. Headboard X1 Double Slat Cap Single Slat Cap Wooden Slats X 12 X 24 X 24 Before you throw the package, please use the Check Box to identify the parts and ensure that you have all the parts needed for the assembly.
C Parts F E B This item is packed in 2 boxes! All parts listed on this page are in Box B. If Box A is missing please contact your Retailer. There are inner box(es) that include components required to complete this assembly. Footboard X1 Side Panel X2 Side Rail X2 Center Rail X1 Before you throw the package, please use the Check Box to identify the parts and ensure that you have all the parts needed for the assembly.
1 2 3 Hardware Pack 4 1/4" X 3/4" X 24 1" X 16 1/4" X 1 9/16" X 12 4mm X1 Please do not completely tighten all the hardware, until the entire assembly is complete, unless otherwise indicated in the step-by-step instructions. The screw(s), bolt(s) to be used at each step are shown in actual size in the lower right corner of the page.
Step 1 Open the compartment on the back side of the headboard A, take all parts out for assembly, close the compartment with the Velcro as illustrated.
Step 2 Attach Z X 4 to A and B with ❷. A Screw ❷ to A, Screw ❶ to B.
Step 3 C C T S Attach S and T to C with ❶. Repeat the same step for remaining parts C, S and T. S C Make sure that the hole on C is oriented on upper side.
Step 4 C A A T 2 Hang sub-assembly C X 2 on A and B as illustrated, don't completely tighten the bolts until STEP 6 is complete.
Step 5 Attach L X 2 to F with ❶.
Step 6 Attach F to A and B with ❶. Then properly tighten all the bolts.
Step 7 C Attach E X 2 to C X 2 with ❸. E The slat holes on part E should be facing upward.
P X X Y P P P E 8.1 8.2 X F Y F 8.3 Step 8 8.1 Insert P into X, 8.2 Press X into E, repeat the same procedure for the opposite side of the bed with a new P and X. 8.3 Insert ends of both P into Y, then press Y into F as illustrated. Repeat the same procedures going backwards for every row of slats. SLAT WARNING E P Correct: Slat curve should be facing upwards. Incorrect: Slat curve facing downwards.
Helpful Hints Weight Limit: 450 Lb / 204 Kg ● Move your new furniture carefully, with two people lifting and carrying the unit to its new location. ● Your furniture can be disassembled and reassembled to move. ● Some parts have been pre-assembled for this item. They are illustrated on this page and available for replacement. WARNINGS: For safety reasons and to prevent injuries: ● This bed is not intended for use by children under 4 years old. ● Prohibit jumping and horseplay on this bed.
(Negro) (Marfil) (Gris claro) NO LO REGRESE A LA TIENDA ! Cama tapizada Si le faltan piezas o las que se incluyen están dañadas, con mucho gusto le enviaremos sus piezas de reemplazo sin cargo extra. Matrimonial Fecha de compra Número de lote Gracias por su compra ! Información sobre la garantía Garantiza que este producto estálibre de defectos de fábricaen la mano de obra y el material y se compromete a solucionar dichos defectos.
Paquete de componentes Nota: Por favor no apriete completamente las piezas hasta que el ensamblaje sea completado, a menos de que se indique específicamente en las instruccíones de paso a paso. Los tornillo(s), perno(s) que se utilizarán en cada paso se muestran en tamaño real en la esquina inferior derecha de cada página. Instrucciones Paso 1 Abra el compartimiento en la parte trasera de la cabecera A, saque todas las partes para el ensamble, cierre el compartimiento como se ilustra. Paso 2 ❷.
Límites de peso: 450 Lb / 204 Kg Consejos útiles ● Mueva sus muebles nuevos con cuidado, con dos personas levantando y llevando el aparato a su nueva ubicación. ● Sus muebles se pueden desmontar y volver a ensamblar en caso de mudanza. ● Algunas partes han sido pre-ensambladas en este producto. Se encuentran ilustradas en esta página y disponibles para reemplazo.
(Noir) (Ivoire) (Gris clair) NE RETOURNEZ PAS AU MAGASIN ! Lit rembourré Si une pièce est manquante ou endommagée, nous vous expédierons avec plaisir vos pièces de remplacement gratuitement. Lit deux places Date d'achat Numero de lot CE FEUILLET CONTIENT DES INFORMATIONS DE SÉCURITÉ IMPORTANTES. S'IL VOUS PLAÎT LIRE ET CONSERVER POUR RÉFÉRENCE ULTÉRIEURE.
Quincaillerie Remarque: Ne serrez pas complètement les boulons jusqu'à ce que l'ensemble est achevé, sauf indication contraire dans les intructions étape par étape. les vis & boulons utilisés dans chaque étape sont présentés en taille réelle dans le coin inférieur droit de la page. Instructions Étape 1 Ouvrir le compartiment en arrière du tête lit A, sortir toutes les pièces et puis fermez-le en utilisant le Velcro. Étape 2 Attacher Z X 4 à A et B avec ❷. Vis ❷ à A, Vis ❶ à B.
Limite de Poids: 450 Lb / 204 Kg Conseils utiles ● Déplacez votre nouveau mobilier avec soin, nous recommandons deux personnes pour soulever et transporter le mobilier vers son nouvel emplacement. ● Votre mobilier peut être démonté et reassemblé pour faciliter les déménagements. ● Certaines pièces ont été pré-assemblées pour ce produit. Ils sont illustrés sur cette page et disponibles pour le remplacement.
