Owner Manual

Outlet box installation instructions (continued)
3. Connecting the wires
□ Install the fixture bare copper wire (1) under the green ground screw (EE) on the mounting plate (BB).
□ Connect the fixture bare copper wire (1) to the green (or bare, or green & yellow) supply ground wire (2)
in the outlet box using a wire nut (AA).
□ Connect the white fixture wire (3) to the white (or ribbed) supply wire (4) in the outlet box using a wire
nut (AA).
□ Connect the black fixture wire (5) to the black (or red, or blue) supply wire (6) in the outlet box using a
wire nut (AA).
4. Hanging the lamp body
□ Raise the lamp body (C) to wall, align the holes in backplate with the holes in mounting plate (BB),
and then secure the backplate to the wall with three mounting screws (DD).
BB
3
2
EE 1
6
1
5
AA
4
9
Backplate
DD
C
House wire
black
(or red, or blue)
(HOT)
Fixture wire
black
(HOT)
House wire
white
(NEUTRAL)
Fixture wire
white
(NEUTRAL)
House wire
green
(or bare wire,
or green & yellow)
(GROUND)
Fixture wire
bare wire
(GROUND)