Owner Manual

5. Assembling shade and installing the bulb

□ Swing the swing arm, if the swing arm is hard to swing or have abnormal sound, put a drop of WD-40

or similar product on the joint and let it sit overnight. dry with a soft cloth.

□ Remove the socket ring (A) from the socket by unscrewing the socket ring (A).

□ Place the shade (B) over the socket and secure with the socket ring (A).

□ Prior to installing the bulb, inspect socket for silica packet. If packet is present, then remove and throw

away. Do not expose it to children or pets.

□ Install the 120V, 60HZ, 40-Watt max. medium-base type A bulb (not included) into the socket of the

light lamp.

□ Plug cord into an outlet and turn on at the switch.

Using power cord instructions (continued)

Switch

Swivel

Socket

Bulb

(not included)