Owner Manual

Using power cord instructions (continued)

3. Hanging the lamp body

□ Raise the lamp body (C) to wall, align the holes in backplate with the holes in mounting plate (BB),

and then secure the backplate to the wall with three mounting screws (DD).

4. Installing the cord cover

Optional, if not using cord covers skip to step 5.

□ Place the cord channel (II) on the wall and mark the holes.

□ Drill pilot holes on the marked spots and insert plastic anchors (FF).

(If fastening with wood screws (GG) to studs, skip this step)

□ Attach the cord channel (II) to the wall and secure with two wood screws (GG).

□ Place cord inside the cord channel (II) and press the two cord covers (JJ) firmly on cord channel (II)

to secure.

Backplate