Owner Manual

Using power cord instructions

1. Unpack the lamp and remove the mounting plate

□ Carefully organize and place all parts on a smooth, flat surface. line up all of the parts according to the

installation diagram.

□ Remove the mounting plate (BB) from back of the backplate by unscrewing two mounting screws (DD).

NOTE: If using power cord follow instructions below.

If wiring to an outlet box proceed to outlet box installation instructions.

2. Installing the mounting plate

□ Position the lamp body (C) on the wall at desired location and mark the place for the wood screws (GG)

to be installed.

□ Drill pilot holes on the marked spots and insert plastic anchors (FF).

(If fastening with wood screws (GG) to studs, skip this step)

□ Attach the mounting plate (BB) to the plastic anchors (FF) or the spots that you marked on studs and

secure with four wood screws (GG).

BBFF GG

Backplate