Assembly Instructions

9
11
Insert 2 plastic end caps # 2214 to each end of the 14 wood slats # 2216. Each end
cap # 2214 should be fully inserted to the end
Insérez 2 embouts de plastique # 2214 aux 2 extrémités des 14 lattes de merisier # 2216.
Chaque embout # 2214 doit être inséré jusqu’au fond
12
Insert each end of the 15 wood slats # 2213 into the holes located on the top side of
the 2 slat supports # 2212. Apply a pressure on the end cap 1 side at a time to make
it snap into the 2 holes
Insérez chaque extrémité des 15 lattes de merisier # 2213 dans les trous situés sur la face
supérieure des 2 supports de lattes # 2212. Appliquez une pression sur chaque côté de
# 2214
28x
14x
# 2216
# 2214
U
B
B
N
H
15x
# 2213
# 2214
# 2212