Assembly Instructions

Step 5
Put the Seat Cushion(E) on the Seat.
Your Loveseat is ready for use.
The loveseat can only be used on a level and flat surface.
Step 3
Place the Left Armrest With Leg(D) as pictured above.
Attach Left Armrest With Leg(D) to the Backrest(A) and Seat(B) using Bolts(F) and Washers(G) with Allen
Key(H).
Do not fully tighten the bolts.
Step 4
Turn the Loveseat right side up.
Place the Loveseat on a LEVEL SURFACE.
Inspect it and make sure all parts are adequately connected.
Gently and gracefully, sit into to the Loveseat.
This would help to align all the parts at all the joint areas.
Then get off the Loveseat, with assistance from your adult partner, turn the Sofa over.
In a sequential manner, proceed to tighten all bolts.
When tightening the Bolts, tighten sequentially.
DO NOT tighten any Bolt fully and then move on to the next one.
This may cause the frame to warp.
If there is still wobbles, loosen the bolts and execute this same process.
If the Loveseat is not stable it could lead to damage to the product.
A
B
A
B
C
H
H
Page 4 OF 5