Assembly Instructions

ASSEMBLY INSTRUCTIONS
CAREFULLY UNPACK AND PLACE ALL PARTS
ON A SMOOTH SURFACE.
1. CAREFULLY UNPACK AND LAY OUT THE PARTS AS
SHOWN IN ILLUSTRATION.
2. SCREW LAMP BODY (B) ONTO BASE (A).
3. PUT REFLECTOR (E), SHADE (D) ONTO SOCKET
ON LAMP BODY (B), THEN TIGHTEN IT WITH
RING (F).
4. LOOSEN SCREW (C) A LITTLE, ADJUST THE LAMP
TO A SUITABLE HEIGHT (PLEASE GENTLY PULL THE
CORD WHEN LOWER THE LAMP HEIGHT),
THEN TIGHTEN SCREW (C).
5. STICK THE PAD (G) TO THE BOTTOM OF THE BASE (A)
6. INSTALL RECOMMENDED BULB (NOT INCLUDED
IN THIS PACKING).
7. INSERT THE POLARIZED PLUG INTO AN OUTLET.
TURN ON THE SWITCH AND ENJOY YOUR LAMP!!!
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
THIS PORTABLE LAMP HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE OTHER) AS
A SAFETY FEATURE TO REDUCE THE RISK OF ELECTRIC SHOCK. THIS PLUG WILL FIT IN A
POLARIZED OUTLET ONLY ONE WAY. IF IT DOES NOT FIT FULLY IN THE OUTLET, REVERSE
THE PLUG. IF IT STILL DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN. NEVER USE
WITH AN EXTENSION CORD UNLESS THE PLUG CAN BE FULLY AND EASILY INSERTED. DO
NOT ATTEMPT TO ALTER THE PLUG.
Use 60W Wattage type A bulb
(bulb not included)