Assembly Guide

ASSEMBLY INSTRUCTIONS:
1. Carefully unpack and lay out the parts as
shown in illustration.
2. Screw lamp body (B) onto base (A).
3. Put reflector (E), shade (D) onto socket
on lamp body (B), then tighten it with
r
ing (F).
4. Loosen screw (C) a little, adjust the lamp
to a suitable height (please gently pull the
cord when lower the lamp height), then
tighten screw (C).
Your lamp now is ready to enjoy
IMPORTANT SAFETY INSTRUCTIONS:
THIS PORTABLE LAMP HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE OTHER)
AS A SAFETY FEATURE TO REDUCE THE RISK OF ELECTRIC SHOCK. THIS PLUG WILL FIT
IN A POLARIZED OUTLET ONLY ONE WAY. IF IT DOES NOT FIT FULLY IN THE OUTLET,
REVERSE THE PLUG. IF IT STILL DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN.
NEVER USE WITH AN EXTENSION CORD UNLESS THE PLUG CAN BE FULLY AND EASILY
INSERTED. DO NOT ATTEMPT TO ALTER THE PLUG.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Use 60 Wattage (Maximum) type A
bulb (bulb not included)