1. Prepare 6 bolt assemblies by first inserting a lock washer (#B) onto the bolt (#A) then a flat washer (#C) onto that same bolt (#A). 2. Align the legs (#2) to the holes along the side of the headboard (#1), then insert the bolts and secure. Hook each end of the side rails (#4) onto the slots along the headboard (#1) and foot board (#3).
Insert the threaded ends of the support legs (#7) into the holes along the center Adjust according rail (#6), turn right to tighten. to the ground level. Place the bed slats (#5) onto the rails, then insert a screw (#E) into each hole. Secure using a screwdriver.
Prepare 10 bolt assemblies by first inserting a lock washer (#B) onto the bolt (#A) then a flat washer (#F) onto that same bolt (#A). Insert into the holes. Secure.