Installation & Assembly

For the most precise assembly of the chair please follow the
instructions below:
• Attach the legs to the seat with the 4 long screws
(Part#A5) by fastening with the Allen wrench (Part#A4)
provided within the hardware envelope. Make sure the
y
a
re fully securing the legs to the bottom seat.
• P
lace the chair right side up and have a seat. Look dow
n
t
oward where the smaller screw (Part#A6) is suppose
d
to meet the thread, you will notice that there is a small
gap between the seat and the bracket. Use this small gap
to align the smaller screw (Part#A6) to the thread, using
the Allen wrench (Part#A4).
• While sitting, gently push outward from the inside of the
seat to close the gap.
• W
hen you feel the screw meet the thread turn the screw
until you feel it catch on to the thread, and tighten
completely with the Allen wrench (Part#A4). Repeat this
step for the other side as well.
• Place screw caps (Part#A3) over the A6 screws
previously inserted for a smooth finish.