Assembly Instructions

Step 2
2.1) Insert Top Frame(A5) into the Leg(B5) .
2.2) Attach Top Frame(A5) to Leg(B5) using Bolts(①) with Allen Key(②) as shown above
Tighten the Bolts fully in a sequential manner.
Step 3
Then, with the assistance from an adult partner, stand the Table upright.
Adjust the Pre-installed Levellers until the Table is level with the ground.
To adjust the Levellers, with assistance from an adult partner, tilt the Table to rest on two
feet.
Adjust the levellers to the desired height until the Table is level.
Step 4
Place the Glass Top(C) on the assembled Table Frame.
The Glass and Table are Heavy. Two adults are required whenever lifting and
moving them.
Your Glass Table is ready for use.
This Glass Table can only be used on a flat, level surface.
Step 2.1
Step 2.2
Page 3 OF 4