Caution : You must read this before you proceed Corner Chair Label Picture Description QTY A4 Seat 1 B4 Right Armrest/Leg 1 C4 Left Leg 1 F Seat Cushion 1 G Back Cushion 1 H Small Back Cushion 1 Page 1 OF 5
Label Picture Description QTY ① Bolt (M6*40MM) 6 ② Bolt (M6*32MM) 2 ③ Washer 7 ④ Allen Key 1 Before Beginnin g Assembly : Overview *6 Back Cushion(G) Left Leg(C4) *2 *7 Small Back Cushion(H) Right Armrest/Leg(B4) Seat(A4) Seat Cushion(F) FRONT FACING This Corner Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Corner Chair parts, the above picture is to help you put the various parts into perspective.
Step 1 Step 1.1 Step 1.2 Open the carton and place all the parts onto a clean, non-marring surface. Place the Right Armrest(B4) facedown. 1.1) Align Seat(A4) to Right Armrest(B4) as shown above. 1.2) Attach Seat(A4) to Right Armrest(B4) using Bolts(①), and Washers(③) with Allen Key(④) as shown above. Attach Seat(A4) to Right Armrest(B4) using Bolt(②), and Washer(③) with Allen Key(④) as shown above. Tighten the Bolts fully in a sequential manner. Step 2 Step 2.1 Step 2.2 2.
Step 3 Then, with the assistance from an adult partner, stand the Chair upright. Adjust the Pre-installed Levellers until the Chair is level with the ground. To adjust the Levellers, with assistance from an adult partner, tilt the Chairt to rest on two feet. Adjust the levellers to the desired height until the Chair is level. Step 4 Place the Seat Cushion(F) on the Seat(A4). Tie the rope to the Seat(A4). Step 5 G H Place the Back Cushion(G) and Small Back Cushion(H) on the Corner Chair.
Do not put hot items directly on furniture surface Do not clean furniture with harsh cleansers or polish. To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct sunlight is recommended. Children should not climb or jump on the furniture. Do not write on furniture without a padded barrier to protect the surface. To obtain the longest lifespan of your outdoor products, avoid extended and lengthy exposure to rain, snow, and direct sunshine.
Caution : You must read this before you proceed Glass Table Label Description QTY A5 Top Frame 1 B5 Leg 2 J Glass Top 1 Description QTY ① Bolt (M6*25MM) 5 ② Allen Key 1 Label Picture Picture Page 1 OF 4
Before Beginnin g Assembly : *5 Overview Glass Top(J) Leg(B5) Top Frame(A5) FRONT FACING This Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the variou sparts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Step 1.2 Step 1.1 Open the carton and place all the parts onto a clean, non-marring surface.
Step 2 Step 2.1 Step 2.2 2.1) Insert Top Frame(A5) into the Leg(B5) . 2.2) Attach Top Frame(A5) to Leg(B5) using Bolts(①) with Allen Key(②) as shown above Tighten the Bolts fully in a sequential manner. Step 3 Then, with the assistance from an adult partner, stand the Table upright. Adjust the Pre-installed Levellers until the Table is level with the ground. To adjust the Levellers, with assistance from an adult partner, tilt the Table to rest on two feet.
Do not put hot items directly on furniture surface Do not clean furniture with harsh cleansers or polish. To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct sunlight is recommended. Children should not climb or jump on the furniture. Do not write on furniture without a padded barrier to protect the surface. To obtain the longest lifespan of your outdoor products, avoid extended and lengthy exposure to rain, snow, and direct sunshine.