Owner Manual

Step Step 13
å
Insert the DRAWER SIDES (D12 and D13 ) at an angle
into the slot at each end of the DRAWER FRONT (K).
å
Slide the DRAWER BOTTOM (D723) into the grooves in
the DRAWER SIDES (D12 and D13) and DRAWER FRONT (K).
å
Fasten the DRAWER BRACE (M67) to the DRAWER
FRONT (K). Tighten one HIDDEN CAM.
å
Fasten the DRAWER BACK (D115) to the DRAWER
SIDES (D12 and D13) and DRAWER BRACE (M67). Use five
BLACK 1-9/16" FLAT HEAD SCREWS (30S). Repeat this
step for the other DRAWERS (J and L).
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
UNFINISHED
1
2
34
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT roove.
With the palm of your hand,
tap the DRAWER BOTTOM
down into the roove.
K
D12
D723
D115
D13
K
K
D12
D13
D12
D13
Groove
M67
M67
30S
Start each screw a few turns before
completely tihtenin any of them.
BLACK 1-9/16" FLAT HEAD SCREW
(15 used in this step)
Surface with
HIDDEN CAM
Arrow
Maximum
210 derees
Minimum
190 derees
Pae 17