Owner Manual

8
12
*NOTE: WE RECOMMEND THAT YOU ATTACH THE PRODUCT TO YOUR WALL
AS A SAFETY PRECAUTION USING ANTI-TIPPING HW (O) AS BELOW
INSTRUCTION.
Attach Mounting Plate to the Back Frame (B) by using Bolt (I), make sure the
Mounting Plate extend DOWNWARD.
Drill 2 holes in your wall approximately 2” (Inches) BELOW the corresponding
positions of Mounting Plate and insert Wall Anchor as shown.
*NOTE: You may need to tap LIGHTLY with a rubber mallet.
Now connect the corresponding Mounting Plate with Connection Strap and tighten as
described before locking in place.
C
B
Wall
Wall
Wall
2
1
Wall
3
4
O
Cleaning & Care
Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces
with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time.
Periodically check that all connections are tight.
I
N