Installation & Assembly

STEP 1

Begin assembly by attaching Legs (J and

K) to Table Top Frame (G) using 2 Sunk

Bolts (D) per leg. Do not tighten bolts

at this time.

STEP 2

Attach Support Brace (I) to Legs (J

and K) using 1 Bolt (A), 1 Spring

Washer (B) and 1 Flat Washer (C) per

leg. Tighten all bolts from steps 1 and

2 with Allen Wrench (E) provided.

STEP 3

Attach Glass Pads (F) to tabs on

Table Top Frame (G).

STEP 4

Carefully place Glass Top (H)

down into Table Top Frame (G).

The assembly is now complete.

METAL END TABLE WITH GLASS TOP

Model #5540-883

HARDWARE LIST

A (4) 1/4” x 15mm Allen Bolts

B (4) Spring Washers

C (4) Flat Washers

D (8) Sunk Bolts

E (1) Allen Wrench

F (4) Glass Pads

PARTS LIST

G (1) Table Top Frame

H (1) Glass Top

I (1) Support Brace

J (2) Legs 1

K (2) Legs 2

QTYPART

HARDWARE QTYPART HARDWARE

4A 4B

CARE & MAINTENANCE

The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,

as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.

SQUARE METAL END TABLE WITH 8MM

TEMPERED GLASS TOP

Page 1 of 1

Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all

components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.

This product is designed for residential use only.