Installation & Assembly

﹡
﹡﹡
﹡
DO not tighten screws & bolts until the entire unit is completely assembled.
1. Using screw (A) & (B) to assemble
shelf frame (4), right leg (2) and left
leg (3) as shown.
2. Likewise assemble second shelf
frame (4) as shown.
3. Using screw (A) & (B) to assemble
the top frame (1) and legs as shown
then add the pad (D) onto the end of leg.
4. Turn the unit upside down, put the
glass pads ( C ) on the frame, then
put on ( 5 ) glass top and insert (6)
glass shelf as shown.
YOUR NEW METAL END TABLE IS FINISHED
AND READY TO USE.
THIS PRODUCT IS NOT INTENDED FOR COMMERCIAL USE