Assembly Instructions

Insert backrest metal plates to both arms as shown below.
Ensuring it is correctly in place.
4 of 8
5 of 8
Secure both back cushions by locating the zipper end. Fasten both sides and
continue all the way to the end. Flip the pillow into position when finished.
Align all four legs onto pre-drilled holes and secure by hand.
Please avoid overtightening
Locate pre-drilled holes on the side of sofa body and match the orientation with
the correct armrest.
Now, carefully join armrest (with the three threaded rods exposed) with sofa body by
aligning and going through the three pre-drilled holes at the side of sofa body.
Open compartment cover underneath the sofa base and secure all three threaded rods
with flat washers, spring washers and nuts from inside with spanner, making sure
thereis no movement.
Repeat step for other armrest.