LOVESEAT 8 of 8
PARTS AND HARDWARE Avoid using sharp objects such as a knife to open packing as you may accidentally damage the upholstery.
7 ASSEMBLY INSTRUCTIONS Place accent pillows as desired . CAUTION: At least two adults are required to safely complete performing this task. Other lifting attempts may risk back injury due to large and heavy part(s). Carefully unpack parts/hardware from storage of seat body and place on a clean flat surface. Storage Screw in three threaded rods into pre-drilled holes of armrest by hand until about half of the thread is exposed. Repeat steps for other armrest.
Locate pre-drilled holes on the side of sofa body and match the orientation with the correct armrest. Now, carefully join armrest (with the three threaded rods exposed) with sofa body by aligning and going through the three pre-drilled holes at the side of sofa body. Open compartment cover underneath the sofa base and secure all three threaded rods with flat washers, spring washers and nuts from inside with spanner, making sure thereis no movement. Repeat step for other armrest.
