Assembly Instruction

Attach the Leg Frame (A) to Seat (B) by using Flat Washer (E), Lock Washer (D), Bolt (C) with

Allen Key (F).

Take the Allen Key, and turn the bolts

until the legs are secure. DO NOT

TIGHTEN COMPLETELY. Stop when

you feel you are adding force to tighten

the bolt.

Helpful Tip:

- Instead of applying downward pressure

while reaching under to tighten bolts,

have someone sit on the chair while you

tighten the bolts.

Stand chair up on an even surface and

check that it is balanced.

If there is a slight wobble, apply

downward pressure in the corner where

a leg is uneven. Keeping pressure in that

corner, tighten all bolts. If balanced,

apply downward pressure evenly in the

center and tighten all bolts. Do not

over-tighten beyond hole depth.

Cleaning & Care

Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean

surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen

over time. Periodically check that all connections are tight.