Assembly

2
step 1 - attaching the wings
1.1
Attach (C) wing to (A) headboard
using (H1) bolts and (H2) washer.
Tighten using flat head screwdriver.
Please note: Make sure the top of the
(A) headboard is level with the top of
the (C) wings before tightening.
step 2 - attaching the headboard legs
2.1
Insert (B) headboard leg through hole
of (A) headboard and align the slots
with the holes.
Please note: Make sure the “Out”
sticker on each (B) headboard leg is
facing the correct way.
2.2
Attach (B) headboard legs to (A)
headboard using (H3) bolts and (H2)
washers. Tighten with a flat head
screwdriver.
Please note: Make sure the
(B) headboard legs are flush with
the ground before tightening.
OUT
Wingback headboard assembly