Assembly Instruction

Attached two Legs(B) to the Table Top(A). Use Bolt(D) Lock Washer(E) and Flat Washer(F) on
holes of two Legs(B). Turn the Allen Key(G) in Bolt(D).
D
C
C
Cleaning & Care
Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a dry
or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time. Periodically check that all
connections are tight.
Attach Anti-tipping hardware(H) to wall: Attach bracket (vertically) to wall using 2 of the screws
provided; Attach bracket (horizontally) to furniture back (directly below top) with 2 of the screws
provided. Place bracket as close to center of furniture back as possible in relation to wall stud
and the desired position in the room; Move furniture to its final position. Thread the strap through
bracket, pull it tight.