ASSEMBLY INSTRUCTION ROUND DINING TABLE Top Panel Hie Bolt X Allen Key 4mm % (s s 1PC PCS PCS 1PC &l Metal Bracket & Cam Brit B Cam Screw Bl cam Nut & £ B PCS PCS PCS PCS This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly. place the contents on a carpeted or padded area to protect them from damage.
1 Attach the Metal Bracket (E) to the Leg (B) by using Bolts (C) with Allen Key Cam Bolt {F) to the per-drilled hole as below shown. 2 Put Cam Nut (H} on the back of Top Panel {A), then put the Leg (B) closed to the Cam Nut (H). Lock the Cam Screw (G) by using Allen Key (D).
Lock the Leg (B) to the back of the Top Panel (A} by using Bolts (C) with Allen Key (D). Repeat step 1 and step 2 to assemble other 3 legs. Cleaning & Care Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time. Periodically check that all connections are tight.
