Assembly Instruction

Table Of Contents

ASSEMBLY INSTRUCTION

METAL SUPPORTS X-FRAME END TABLE

This page lists all the contents included in the box.

Please take the time to identify the hardware as

well as the individual components to this product.

As you unpack and prepare for assembly, place

the contents on a carpeted or padded area to

protect them from damage.

Top Panel

1PC

Side Frame

2PCS

Tension Bar

2PCS

Machine Screw

3/16"X1/2"

5PCS

4PCS

Wood Screw

4*39 mm

Nut

3/16"

1PC

Lower Panel

Allen Wrench

1PC

Spanner Wrench

1PC

Screw

1/4”X1”XØ16

4PCS

1PC

Phillip Screwdriver

(Not provided)

1/4"

3/16"

PAGE 1
ASSEMBLY INSTRUCTION A METAL SUPPORTS X-FRAME END TABLE Top Panel B 1PC 1PC E Screw 1/4”X1”XØ16 F Nut 3/16" 1PC J Side Frame D 2PCS G Allen Wrench 1/4" 1PC 4PCS I C Lower Panel IK Spanner Wrench 3/16" Wood Screw 4*39 mm 4PCS Tension Bar 2PCS H Machine Screw 3/16"X1/2" 5PCS Phillip Screwdriver (Not provided) 1PC 1PC This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product.
PAGE 2
*** Do 1 not tighten screws & bolts until the entire unit is completely assembled. Attach Tension Bar (D) to Side Frame (C) using Machine Screw (H) and Phillip Screwdriver (K). Then secure middle using Machine Screw (H) and Nut (I). While holding Nut (I) with Spanner Wrench (J), but not tighten it. J K 2 I Attach Side Frame (C) to Top Panel (A) using Screw (E) and Allen Wrench (F) as shown. Attach Side Frame (C) to Lower Panel (B) using Wood Screw (G) and a Phillip Screwdriver (K) as shown.