Owner Manual

Care and Cleaning
□ Clean the light fixture with a soft, dry cloth. Do not use any cleaners with chemicals, solvents, or harsh abrasives.
Troubleshooting
Possible Cause
□ The bulb is burned out.
□ The power is off.
□ There is a faulty wire connection.
□ The circuit breaker is off.
□ There is an exposed wire.
□ There are too many items on
one circuit.
□ Discontinue use of the light fixture.
□ Contact a qualified electrician or
call the Customer Service Team at
904-642-4340.
□ Unplug other items on the circuit.
□ Ensure that the circuit breaker is
set in the on position.
□ Check the wiring.
□ Ensure that the power supply
is turned on.
□ Replace the light bulb.
Solution
The bulb will not light.
The fuse blows or a
circuit breaker trips when
the light is turned on.
Problem
3 Hanging the light fixture
□ Push all excess wires into the outlet box.
□ Raise the canopy (GG) to the ceiling and secure in
place by screwing the screw collar nut (II) onto the
screw collar loop (HH).
4 Installing the bulbs
□ Prior to installing the bulb, inspect socket for silica
packet. If packet is present, then remove and throw away.
Do not expose it to children or pets.
□ Install a 120V, 60Hz, 60-watt max. medium-base type
A bulb (not included) into each socket on the fixture.
GG
II
HH
Installation instructions (continued)