Owner Manual

Assembly instructions
1. Assembling the fixture body
□ Carefully unpack the fixture, lay out all parts
on clean surface.
□ Screw five socket assemblies (B) onto the
nipples of the fixture body (A).
□ Remove the socket rings (D) from the sockets
by unscrewing the socket rings (D).
□ Place a metal shade (C) over each socket and
secure with a socket ring (D).
2 Preparing the light fixture to hang
□ Attach the quick link (KK) to one end link of
chain (JJ) and attach the quick link (KK) to the
chain loop (A).
□ Remove chain links from the chain (JJ) in order to
achieve the desired length for hanging the fixture .
□ Thread the fixture and bar copper or silver ground
wires up through every other link in the chain (JJ).
A
JJ
KK
To open a chain link: Use a pair of pliers and a
screwdriver as shown above to open a chain link.
Wrap the jaws of the pliers with cloth to protect
the finish of the chain.
A
B
C
D
Socket
Nipple