PAGE 2 OF 8 HARDWARE LIST NAME: CODE: QTY: NAME: CODE: QTY: NAME: CODE: QTY: NAME: CODE: QTY: rd F CHIPBOARD SCREW M3X16mm NAME: CHIPBOARD SCREW M4X38mm NAME: WOOD DOWEL M8X35mm A PCs Rw, CAM LOCK & CAM BOLT D tsetse CAM LOCK COVER G PCs FLAT WASHER M6 I PCs ~~ NAME: CODE: QTY: ALLEN KEY M4 L 1Pc CODE: B QTY: 6 Pecs & NAME: WOOD DOWEL MBX30mm CODE: E QTY: PCs ad CODE: C QTY: pecs NAME: RUNNER 400mm CODE: F QTY: 4 Sets NAME: PINHEAD CHIPBOARD SCREW M4X16mm (BLACK) CODE: H QTY: 1B8Pcs 0 NAME: SPRING WASHER M6
PAGE 3 OF 6 STEP 1 A) Insert and secure Cam Bolt(D) to Top Panel(1) STEP 2 A) Insert Wood Dowel(C) to Left&Right Side B) Attach Cam Lock(D) to Left&Right oz” Side Panel(243) C C) Attach Cam Bolt(D) to Left&Right Side NOTE : Make sure arrows on each Cam Lock point towards nearest edge with holes STEP 3 A) Attach Runner(F) to Left&Right Side using Chipboard Screw(A) to secure NOTE : Do not over tighten the screw NOTE : Runner roller should be toward the front of the panel NOTE : Chipboard Screw(4) should be a
PAGE 4 OF 6 STEP 4 4) Attach Wood Dowel(C) to three of Center Bar(5) B) Attach Cam Lock(D) to three of Center Bar(5) NOTE : Make sure arrows on each Cam Lock point towards nearest edge with holes STEP 5 A) Attach Leg(6) to Bottom Frame(4) and secure with CBC Screw(K), Spring Washer(J) & Flat Washer(l) tighten with Allen Key(L) clockwise STEP 6 A) Attach Center Bar(5) to Left&Right Side Panel(243) secure with Cam Lock(D).
PAGE 5 OF 8 STEP 7 4) Attach Bottom Frame(4) to underneath of Side Panel and secure with Chipboard Screw(B) NOTE: Do not over tighten the Screw STEP 8 A} Attach Top Panel(1) to Left&Right Side secure with Cam Lock(D}.
Note : Do not over tighten the Cam Lock & Screw PAGE 6 OF 6 STEP 10 D A) Insert Wood Dowel(E) to Left&Right Drawer & Drawer Back(103) B) Attach Cam Lock(D) to Left&Right Drawer & Drawer Back(103) ¢) Attach Cam Bolt(D) to Drawer & Left&Right Drawer V7 Attach Left&Right Drawer to Drawer Back(103) secure with Cam Lock(D) Using Cam Lock Cover(G) to cover Cam Lock(D) NOTE : Make sure arrows on each Cam Lock point towards nearest edge with holes A) Slot in Drawer Base(104) in corresponding grooves B) Attach Drawe
