Installation & Assembly

HARDWARE LIST
A (4) 1/4” x 15mm Allen Bolts
B (4) Spring Washers
C (4) Flat Washers
D (16) Sunk Bolts
E (1) Allen Wrench
F (8) Glass Pads
PARTS LIST
G (2) Small Leg Panels
H (2) Medium Leg Panels
I (1) Small Metal Brace
J (1) Medium Metal Brace
K (1) Small Table Frame
L (1) Medium Table Frame
M (1) Small Glass Top
N (1) Medium Glass Top
QTYPART
4C
1E
HARDWARE QTYPART HARDWARE
16
8
D
F
4A 4B
CARE & MAINTENANCE : The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
AA
B
B
C
C
DD
D
D
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
J
K
L
M
N
G
H
G
H
I
Illustration for
both small and
medium tables
STEP 2 - Figure 1
Attach Small Leg Panels (G) to Small
Table Frame (K) using 2 Sunk Bolts (D)
per leg.
STEP 3 - Figure 1
Repeat steps 1 and 2 for Medium Table
using Medium Leg Panels (H), Medium
Metal Brace (J) and Medium Table
Frame (L). Tighten all bolts with Allen
Wrench (E) provided.
STEP 1 - Figure 1
Begin assembly by attaching Small Metal Brace (I)
between Small Leg Panels (G) using 1 Allen Bolt (A), 1
Spring Washer (B) and 1 Flat Washer (C) per panel.
FIGURE 2
FIGURE 1
STEP 4 - Figure 2
Attach Glass Pads 4 (F) to each table.
STEP 5 - Figure 2
Carefully set Small Glass Top (M) and Medium Glass
Top (N) onto the Glass Pads (F).
STEP 6 - Figure 2
Slide Small Table under Medium Table for storage.
The assembly is now complete.
METAL NESTING TABLES WITH 8MM TEMPERED
GLASS TOP, TWO PER CARTON
Page 1 of 1
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all
components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.
This product is designed for residential use only.