User's Guide Part 3

PureWave Quantum 6600 User Guide v2.1
Page 161
3.6.3.5 Alarm Management
The Quantum Base Station has advanced alarm and fault management capabilities. When a fault or
event occurs, an alarm condition will be raised. An alarm is a persistent indication of a fault that clears
only when the triggering condition has been resolved.
To configure Alarm Management, select the Configuration Tab and then select the alarm Main Menu
Option (Figure 159).
Figure 159 Alarm Management
When in View or Edit mode, the options are:
action. Allows acknowledgement, clearing and un-acknowledgment of alarms
active. View a list of the active alarms
To acknowledge, clear or un-acknowledge an alarm, select the action sub-Element (Figure 160). The
User is now presented with a window that displays an operation to be performed on the following
alarm-names.
Voltage. Allows acknowledgement, clearing and un-acknowledgment of alarms
Sector-Comm-Loss. Indicates if Sector is Up or Down.
Temperature. Low, Hi or Normal Operating Temperature
Sector-Down. View the active alarms
GPS-Synch-Holdoff. Indicates if GPS is reliable or unreliable.
GPS-Synch-Loss. Indicates if GPS is reliable or unreliable.
Select the alarm type and click Perform to apply the action