User's Guide Part 3

PureWave Quantum 6600 User Guide v2.1
Page 160
Name
Description
Field Example
snmpTargetAddrName
Name of the target snmpTargetAddrTable
1-32 chars
snmpTargetAddrTDomain
This object indicates the transport type of the
address
contained in the snmpTargetAddrTAddress object
“1.3.6.1.6.1.1” is the
domain for UDP
snmpTargetAddrTAddress
Specifies the target address, which consists of an IP
address followed by a UDP port number
Example:
127.0.0.1.0.162.
snmpTargetAddrTimeout
Sets a timeout value (in ticks) for the transmission of
InformRequest PDU or TCP connection. The agent
will wait this amount of time for a response to an
InformRequest PDU or TCP connection before
attempting again.
Example: 1500 is 1.5
seconds
snmpTargetAddrRetryCount
Sets the number of times that the agent will resend
an InformRequest PDU or attempt to establish a TCP
connection before abandoning further attempts and
logging an error in the agent log file.
Example: 3
snmpTargetAddrTagList
A list that provides the correlation between
snmpTargetAddrTable and snmpNotifyTable. When
generating a notification, the agent searches this list
for the value contained in snmpNotifyTag. If the list
contains this value, then the agent uses the
information in this row to create a destination for the
notification.
For example:
“std_trap”
snmpTargetAddrParams
Indexes the row in snmpTargetParamsTable that
describes the security parameters to be used when
sending the notification. If the row specified does not
exist, the notification will not be sent.
For example:
“target_v2”
snmpTargetAddrStorageType
Specifies how the row should be stored.
The default value is
nonVolatile.
snmpTargetAddrEngineID
Internal use only, leave blank
“”
snmpTargetAddrTMask
Internal use only, leave blank
“”
snmpTargetAddrStorageType
Internal use only ( Maximum message size) default
2048
2048
enabled
This field allows trap sending to a given NMS to be
paused
true/false
Table 13 SNMP Target Address Table