User's Guide Part 3

PureWave Quantum 6600 User Guide v2.1
Page 140
Figure 135 Sector Statistics Upstream RSSI CINR Metrics
At the Main Web GUI Interface Screen select the Configuration Tab and then the sector Main Menu
Option, then the statistics-mss Main Menu Sub-Element and then harq-counters. There will be three
HARQ Service Flow identifiers displayed for each Subscriber. There are two distinct groups to this
window (refer to Figure 136).
Key Settings. This indicates the relevant Subscriber. This is not a configurable parameter. The
following information is presented:
o Sector
o MAC Address
o Svc Flow ID
HARQ Counters Per MSS. The following Metrics are displayed. These are displayed as a raw
number but they can also be displayed in graphical form by selecting the "Graph" command
button. It is not possible to view all the metrics in one window and therefore the User has to
scroll down to view them all.
o HARQ Enabled. This indicates whether HARQ has been enabled. This is not however a
configurable parameter.
o HARQ DL Pkt Ack
o HARQ DL Pkt Neg Ack
o HARQ DL Pkt Trans
o HARQ DL Pkt Retrans
o HARQ DL Pky Discards
o HARQ DL Pkt 1st Neg Ack
o HARQ UL Pkt Ack
o HARQ UL Pkt Neg Ack
o HARQ UL Pkt Trans