User's Guide Part 3

PureWave Quantum 6600 User Guide v2.1
Page 113
The main grouping sections are:
Key settings. This simply displays:
o Profile #
ARQ Profile. This displays all that the available configuration parameters. These are:
o Name. This is the profile name and it is a text field
o Description. This is the profile description and it is a text field.
o Enable. This is a check box to enable/disable the ARQ profile.
o Deliver-in-order. This is a check box to enable/disable the ARQ deliver in order option.
o Window-size. This is the ARQ Window Size. This is assigned as a number in the range 1
to 1024 (default).
o Timeout-tx-delay. This is the ARQ Transmit Retry Timeout Delay. This is assigned in units
of 5msec in the range 0 to 1310 with a default of 5 (25msec).
o Timeout-rx-delay. This is the ARQ Receive Retry Timeout Delay. This is assigned in units
of 5msec in the range 0 to 1310 with a default of 5 (25msec).
o Block-lifetime. This is the ARQ Transmit Retry Timeout Delay. This is assigned in units of
5msec in the range 0 to 1310 with a default of 5 (25msec).
o Sync-loss. This is the ARQ Sync Loss Timeout. This is assigned in units of 5msec in the
range 0 to 1310 with a default of 120 (600msec).
o Purge-timeout. This is the ARQ Purge Timeout. This is assigned in units of 5msec in the
range 0 to 1310 with a default of 32 (160msec).
o Block-size. This is the ARQ Block Size. The options are 16, 32, 64, 128 (default), 256, 512
and 1024.
o Ack-processing-time. This is the ARQ Acknowledge Processing Time. This is assigned as a
number in msec in the range 0 (default) to 255.
The System is pre-configured with 6 default profiles. If the User wants to add any of their own
configurations, they must delete a profile before they can add and configure a new one.
When in Edit mode, the User is presented with:
<Add arq-profile>. If the User selects this option and there is available profile to be added then
they can simply add and then they will be dropped directly into the configuration window.
A List of all the profiles with a red box beside each profile. If the User navigates to the red icon
then this will present the User with the ability to delete the profile (refer to Figure 109).