User's Guide Part 3

PureWave Quantum 6600 User Guide v2.1
Page 130
Interface Settings and Status. The configured settings and their current status that are
displayed for the five interfaces are:
o Admin State. This is the admin state.
o Oper State. This is the operational state.
o Link Speed. This is the interface link speed.
o Duplex Type. This is duplex setting.
o Maximum MTU Length. This is the maximum configured MTU Length.
o MAC Address. This is the MAC address of the interface.
At the Main Web GUI Interface Screen select the Configuration Tab and then the interface Main Menu
Option, then the status main Menu Sub-Element. The resulting window will be split into two main
sections (refer to Figure 124). These are:
Key Settings.
o Name. This will indicate which interface is being displayed
Interface Statistics and Status. The following settings and status are displayed. These are not
editable parameters.
o Admin State. This is the admin state.
o Oper State. This is the operational state.
o Link Speed. This is the interface link speed.
o Duplex Type. This is duplex setting.
o Maximum MTU Length. This is the maximum configured MTU Length.
o MAC Address. This is the MAC address of the interface.
Figure 124: Interface Status Key Settings and Status
The same format is repeated for all interfaces and therefore only one will be outlined. To view the
Interface Statistics of another interface then simply at the Main Web GUI Interface Screen select the