User's Guide Part 3

PureWave Quantum 6600 User Guide v2.1
Page 127
Figure 121: Software Partition Selection and Display
The purpose of the Select Next SW Image to Boot from is that this command will allow the selected
image to run after the next reboot. It will not affect the currently "Running" image. Subsequent reboots
will run the "Select" software image. The available choices are:
A: The image loaded in software bank A.
B: The image loaded in software bank B.
Next: The alternative to the currently "Running " image. If the current image is A, the next boot
will use B and vice versa.
The User needs to scroll down to the Select Software Image grouping and thus select what actions they
wish to take (refer to Figure 122). The User does not need to be in Edit Mode within this menu option.
Select. The options to select here are:
o Next
o B
o A
Now. This is a check box that has to be enabled.