User's Guide Part 3

PureWave Quantum 6600 User Guide v2.1
Page 126
protocol://[user[:password]]@host[:port]/path
protocol can be ftp, http, or https
Figure 120: Software Download and Installation Dialog
Once the URL has been entered, the User must select the Perform Command Menu Option in the
Download Software Images, install, select and reboot on Base Station section to initiate the upgrade
process. This action will upgrade the Base Station in one simple step. It will:
(1) Transfer the software to the relevant partition on the Base Station. The software will always be
loaded into the non Current Boot partition. For example, if the Current Boot is A, then the
software will be loaded into B.
3.6.2.2 Software Partition Selection and Display
The final step in the Multiple Step Software Upgrade process is the software partition selection and
display procedure.
At the Main Web GUI Interface Screen select the Configuration Tab, then the software Main Menu
Option and then the boot Main Menu Sub-Element. The User will be presented with two main grouping
sections (refer to Figure 121):
Select Next SW Image to Boot from
Select Software Image