User's Guide Part 3

PureWave Quantum 6600 User Guide v2.1
Page 124
user:password@ is optional, and the :password part can be omitted
[:port] is also optional
Examples using ftp (you can substitute http or https):
ftp://myhost.com/filename
ftp://myhost.com/directory/filename
ftp://myhost.com:2323/directory/filename
ftp://[e-mail]:2323/directoryname/filename
ftp://myname:[e-mail]:2323/directoryname/filename
URL of remote source file; format is as follows:
protocol://[user[:password]]@host[:port]/path
protocol can be ftp, http, or https
Figure 119: Single-Step Software Upgrade Dialog
Once the URL has been entered, the User must select the Perform Command Menu Option in the
Download Software Images, install, select and reboot on Base Station section to initiate the upgrade
process. This action will upgrade the Base Station in one simple step. It will:
(1) Transfer the software to the relevant partition on the Base Station. The software will always be
loaded into the non Current Boot partition. For example, if the Current Boot is A, then the
software will be loaded into B.
(2) Write the software into the relevant partition flash. This step will automatically change the next
boot option to the other partition from which it currently is. This is of course the partition to
which the software has just been downloaded.