User's Guide Part 3

PureWave Quantum 6600 User Guide v2.1
Page 122
Figure 117: FTP Server Configuration
At the Main Web GUI Interface Screen select the Configuration Tab and then the software Main Menu
Option. This will display the software Settings and the display is split into two main grouping sections.
There are three further sub-element associated with this option. There are no User configurable options
for the software Main Menu Option.
The Base Station flash contains two partitions which are both loaded with software. There is a partition
“A” and a partition “B”. The GUI will provide an indication as to current status of the software.
The two main grouping sections for this Menu Main Sub-Element are (refer to Figure 118):
Software Image Management. This displays the details for each software image. The options
are:
o Current Boot. This indicates which partition provided the current active software load.
o Next Boot. This indicates after the next reboot of the Base Station, which partition the
software will be loaded from.
o Boot Partition A. This indicates the software revision that is currently loaded into
partition A.
o Boot Partition B. This indicates the software revision that is currently loaded into
partition B.
o Sw Version Candidate. This is not relevant for the current method of software upgrade.
It will simply indicate "No Software candidate available".
Software Image Status. This provides an indication of the download status. The options are:
o State Detail. This will provide an indication of the current state of software upgrade
detail.
o Download Progress. This is a percentage indicator of the state of download progress.