User's Guide Part 2

PureWave Quantum 6600 User Guide v2.1
Page 57
After making the various configuration changes, the User will need to "Commit" and "Save"
the changes.
3.5.3.1 Sector, General Settings
At the Main Web GUI Interface Screen select the Configuration Tab, select sector Main Menu Option
and then general Main Menu Sub-Element. This will display the Sector Settings window (Figure 44).
Figure 44: Sector Settings
There are two basic groups to this Sector option. These are:
Sector Advanced Settings (configured)
Sector Provisioning (configured)
The User now has to navigate to the next level, therefore at the Main Web GUI Interface Screen select
the Configuration Tab, select sector Main Menu Option, general Main Menu Sub-Element and then 1,
this will display the key settings window. There are three distinct groups to this window (refer to Figure
45).
Key Settings. This indicates the relevant sector, which as has been described in number 1. This is
not a configurable parameter.
Sector General Administration (configured). This is an indication whether the sector has been
enabled to effect general administration. This can be configured.
Sector General Status. This indicates the current status of the following parameters. These
parameters are non-configurable: