User's Guide Part 2

PureWave Quantum 6600 User Guide v2.1
Page 110
o Vlan-user-priority-high. This is the VLAN User Priority High Byte. This is assigned as a
number in the range 0 (default) to 7.
o Vlan-user-priority-used. This is a check box to enable/disable the VLAN User Priority
rule.
The System is pre-configured with 64 default profiles. If the User wants to add any of their own
configurations, they must delete a profile before they can add and configure a new one.
When in Edit mode, the User is presented with (refer to Figure 105):
<Add cls-profile>. If the User selects this option and there is available profile to be added then
they can simply add and then they will be dropped directly into the configuration window.
A List of all the profiles with a red box beside each profile. If the User navigates to the red icon
then this will present the User with the ability to delete the profile.
Figure 105: Service Profile Classifier Profile Edit Capability
3.5.5.2 HARQ Profile
At Main Web GUI Interface Screen select the Configuration Tab, then the service-profile Main Menu
option and then the harq-profile Main Menu Sub-Element. This User is presented with all the 6 pre-
configured default profiles. To physically view all the profile configuration parameters then the User
must actually select a profile and two main grouping sections are presented (refer to Figure 106).