User's Guide Part 2

PureWave Quantum 6600 User Guide v2.1
Page 109
The main grouping sections are:
Key settings. This simply displays:
o Profile #
Classifier Profile. This displays all that the available configuration parameters. These are:
o Name. This is the profile name and it is a text field
o Description. This is the profile description and it is a text field.
o Cls-priority. This User can assign a priority to the classifier. The priority is assigned as a
number in the range 0 to 255. The default priority is 0 (no priority).
o Cls-priority-used. This is a check box to enable/disable the priority rule.
o Eth-type. This is the Ethernet Type. This is assigned as a number in the range 1501 to
65535. This represents the value in decimal format.
o Eth-type-used. This is a check box to enable/disable the Ethernet Type rule.
o Ip-tos-dscp. This is the IP TOS Descriptor. This is assigned as a number in the range 0
(default) to 63.
o Ip-tos-dscp-used. This is a check box to enable/disable the IP TOS Descriptor rule.
o Ip-protocol. This is the IP Protocol. This is assigned as a number in the range 0 (default)
to 255.
o Ip-protocol-used. This is a check box to enable/disable the IP Protocol rule.
o Dest-ip-addr-prfx. This is the IP Destination Address and Prefix (mask length).
Configuration examples are 192.0.0.0/2, 192.168.0.0/3, 192.1468.254.0/23 and
192.168.1.1/32.
o Dest-ip-addr-used. This is a check box to enable/disable the IP Destination Address rule.
o Src-ip-addr-prfx. This is the IP Source Address and Prefix (mask length). Configuration
examples are 192.0.0.0/2, 192.168.0.0/3, 192.1468.254.0/23 and 192.168.1.1/32.
o src-ip-addr-used. This is a check box to enable/disable the IP Source Address rule.
o Dest-port-start. This is the Destination Port Low Limit. This is assigned as a number in
the range 0 (default) to 65535.
o Dest-port-end. This is the Destination Port High Limit. This is assigned as a number in
the range 0 (default) to 65535.
o Dest-ip-port-used. This is a check box to enable/disable the Destination Port rule.
o Src-port-start. This is the Source Port Low Limit. This is assigned as a number in the
range 0 (default) to 65535.
o Src-port-end. This is the Source Port High Limit. This is assigned as a number in the
range 0 (default) to 65535.
o Src-ip-port-used. This is a check box to enable/disable the Source Port rule.
o Vlan-id. This is the VLAN ID Tag. This is assigned as a number in the range 0 (default) to
4095.
o Vlan-id-used. This is a check box to enable/disable the VLAN ID rule.
o Vlan-user-priority-low. This is the VLAN User Priority Low Byte. This is assigned as a
number in the range 0 (default) to 7.