Manualshelf

User's Guide Part 2

ManualsBrandsMercury Networks ManualsElectronics6x6 MIMO WiMAX Base Station
41424344454647484950
PureWave Quantum 6600 User Guide v2.1
Page 100
(5) The User will now be presented with the Subscriber configuration options. The options to select
are (refer to Figure 95):
Convergence Sublayer Type. The User can select from a drop down menu. The default
option is Ethernet_CS and the available options are:
o IPV4_CS
o ETHERNET_CS . This is the default setting, the Base Station operates in Standalone
mode.
Client Profile. This profile can be selected from a drop down menu. The User can select
<unset> or from one of the user configured profiles (1 through 8).
IP Address. Applicable/Visible only when the CPE is configured for IPV4_CS Convergence
Sublayer mode and the base station operated in Stand Alone mode. 0.0.0.0 value (default)
means that the CPE will obtain its IP address through DHCP Server. When changed from the
defaults value a static IP address is used for the Provisioning. The CPE device must be
configured with the same IP address.
IP Netmask. Applicable/Visible only when the CPE is configured for IPV4_CS Convergence
Sublayer mode and the base station operated in Stand Alone mode. Defines the Subnet
Mask. Currently only a single IP Address is possible, thus the default value of
255.255.255.25.255 should not be changed!
Customer ID. This is a free format text field that enables the User to uniquely define a
Subscriber. This is edited by selecting the notepad icon.
Maximum Uplink Rate. The User can select the maximum uplink modulation rate. This will
effectively provide a cap on the maximum data traffic rate. This direction is defined as the
Subscriber to Base Station. This is selected via the drop down menu and the options are:
o QAM64 5/6
o QAM64 3/4
o QAM64 2/3
o QAM64 1/2
o QAM16 3/4
o QAM16 1/2
o QPSK 3/4
o QPSK 1/2
Maximum Downlink Rate. The User can select the maximum downlink modulation rate.
This will effectively provide a cap on the maximum data traffic rate. This direction is defined
as the Base Station to Subscriber. This is selected via the drop down menu and the options
are:
o QAM64 5/6
o QAM64 3/4
o QAM64 2/3
o QAM64 1/2
o QAM16 3/4
o QAM16 1/2
o QPSK 3/4
o QPSK 1/2