User's Guide Part 2

PureWave Quantum 6600 User Guide v2.1
Page 99
(3) The User now has to enter the Edit Mode (select Edit Private or Edit Exclusive). The <Add cpe>
option will appear (refer to Figure 93).
Figure 93: Add Subscriber CPE Option
(4) The User must select the <Add cpe> option. A Key Settings window will appear. The User is
prompted to enter the Subscriber CPE MAC Address. The MAC Address must be entered in
Upper Case letters only and using a colon (:) to separate the digits, e.g. 00:17:C4:8F:9B:34. If the
User selects the “?” Command Menu Option within the window then a reminder prompt will be
displayed. Once the MAC Address has been entered the User must select the Add command
button (refer to Figure 94).
Figure 94: Add Subscriber CPE MAC Address