User's Guide Part 2

PureWave Quantum 6600 User Guide v2.1
Page 94
file (refer to Figure 87). The write procedure will copy the running configuration to startup. The new
startup configuration will be effective at the next reboot of the Base Station.
Please note that changes will not be persistent and survive a restart unless the write
command is issued after the changes are made.
Figure 87: Configuration Write Settings
The procedure to write the configuration is:
(1) The User must then press the Perform Command Menu Option. A prompt box will now appear
and the User is requested to confirm "Do you really want to write the file?".
(2) The relevant configuration will now be written and the results of this action will be displayed.
At the Main Web GUI Interface Screen select the Configuration Tab, then configuration Main Menu
Option and then the backup Main Menu Sub-Element. This will display window to backup a
configuration file (refer to Figure 88). The backup procedure will create a binary backup of the entire
database which is compressed into a tar.gz file. This is effectively the essence of the Base Station but it
cannot be edited by the User.