User's Guide Part 2

PureWave Quantum 6600 User Guide v2.1
Page 92
At the Main Web GUI Interface Screen select the Configuration Tab, then configuration Main Menu
Option and then the export Main Menu Sub-Element. This will display window to export a configuration
file (refer to Figure 85). The export option creates an ASCII file that can be physically edited by the User.
The file will be stored in flash on the Base Station and the User will have to upload it off the Base
Station.
Figure 85: Configuration Export Settings
The procedure to export a file is:
(1) Select the CLI export filter from the drop down menu of the CLI Export Filter. The options are:
All. This will export the entire configuration database except for Subscriber CPE
provisioning.
CPE. This will export the Subscriber CPE provisioning database only.
Service-Profile. This will export the Service Profile database only.
(2) Enter the destination filename to export the database in the Filename field.
(3) The User must then press the Perform Command Menu Option.
(4) The relevant file will now be renamed and the results of this action will be displayed.
At the Main Web GUI Interface Screen select the Configuration Tab, then configuration Main Menu
Option and then the import Main Menu Sub-Element. This will display window to import a configuration
file (refer to Figure 86). The import option will import a configuration into the running configuration.