User's Guide Part 2

PureWave Quantum 6600 User Guide v2.1
Page 89
Figure 81: Configuration Copy Settings
The procedure to copy a file is (refer to Figure 81):
(1) Select the file to be copied from the drop down menu of the Existing File Name field.
(2) Enter the copied file name in the Copied File Name field.
(3) Enable the Force field if the User wants to overwrite an existing file on the Base Station.
(4) The User must then press the Perform Command Menu Option.
(5) The relevant file will now be copied and the results of this action will be displayed (Figure 82).
Figure 82: Configuration Copy Successful