User's Guide Part 2

PureWave Quantum 6600 User Guide v2.1
Page 88
The Main Menu Sub-Elements will be examined in detail. The same display elements are presented
when the User navigates to each of these 10 Main Menu Sub-Elements. The display is split into two main
grouping sections (refer to Figure 80).
The top grouping section provides a description and instructions of the action.
The bottom grouping section provides the mechanism to perform the action.
Another common theme throughout the Main Menu Sub-Element is the ability to select a configuration
file for an action. The relevant files are presented to the User via a drop down menu or the files are
listed under the files Main Menu Sub-Element option. To view the files then at the Main Web GUI
Interface Screen select the Configuration Tab and select the files Main Menu Option. This will display all
the relevant files.
The explanation for each file is:
.cnf (configuration) files are created by the export command and can only be read by the import
command. The data in the file is saved as a series of CLI commands. This file is in ASCII format
and can be edited within a text editor.
o profile.cnf file is the Base Station configuration file.
o cpe.cnf is the Subscriber CPE configuration file.
The backup.bak.tgz is the non-editable database backup configuration stored in a compressed
format. This file is created with the backup command and can only be read by the restore
command.
Figure 80: Configuration Settings
At the Main Web GUI Interface Screen select the Configuration Tab, then configuration Main Menu
Option and then the copy Main Menu Sub-Element. This will display window to copy a configuration file.